3 Series E90 320d (M47T2) SAL
17 11 100
Removing and installing or replacing coolant
expansion tank (M47T2, M57T2, N47)
Necessary preliminary tasks:
•
Drain coolant from radiator
Release and disconnect coolant hoses (1).
Unlock and disconnect plug (2) on coolant level switch.
Unlock holder (3).
Release screws.
Remove coolant expansion tank (4).
Installation:
Insert locating pin in rubber grommet.
Check cooling system for leaks.
RA Removing and installing or replacing coolant expansion tank (M47T2, M57T2, N47)
BMW AG - TIS
23.01.2013 07:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
