3 Series E90 320d (M47T2) SAL
22 31 001
Replacing rubber mount for transmission
mounting
Necessary preliminary tasks:
•
Remove rear underbody protection.
•
Support transmission with lifter.
Release screws (1) and nuts (2).
Remove transmission cross-member.
Remove rubber mount from transmission cross-member.
Tightening torque 24 71 1AZ/2AZ
.
RA Replacing rubber mount for transmission mounting
BMW AG - TIS
23.01.2013 07:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
