3 Series E90 320i (N43) SAL
Installation:
-
Pretension door lock (1) with knurled screw (2) until special
tool 51 2 190 just contacts corner points (3).
Important!
Risk of damage!
To tension door lock (1), it is only permitted to turn knurled
screw (2) by a further 1 to 1.5 turns (max.).
Door lock seal must rest uniformly on inner door plate (water
ingress).
-
Tighten down door lock screws, tightening torque
51 21 1AZ
.
RA Removing and installing/replacing door lock in left or right front door
BMW AG - TIS
25.01.2013 09:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
