3 Series E90 320i (N43) SAL
64 11 905
Removing and installing/replacing ventilation
temperature sensor
Necessary preliminary tasks:
•
Remove decorative strip on instrument panel on right
Note:
For purposes of clarity, the following graphics show the heater/air
conditioner removed.
Pull temperature sensor (1) out of retaining lug (2).
Installation:
Make sure rubber ring is correctly seated.
Disconnect plug connection (1) and remove temperature
sensor (2).
RA Removing and installing/replacing ventilation temperature sensor
BMW AG - TIS
25.01.2013 12:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
