3 Series E90 320i (N43) SAL
64 11 212
Removing and installing/replacing heater/air
conditioner fan
Necessary preliminary tasks:
•
Remove trim for instrument panel, bottom right
•
Partially release air duct at side
Disconnect plug connection (1).
Carefully raise lug (1) and feed out housing (2) by turning
clockwise.
Installation:
Lug (1) must not be damaged and must snap audibly into place.
Replacement:
Replace controller for heater/air conditioner fan
RA Removing and installing/replacing heater/air conditioner fan
BMW AG - TIS
25.01.2013 12:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
