3 Series E90 320i (N46) SAL
Turn back special tool 11 9 222.
Push special tool 11 9 221 onto crankshaft.
Important!
When screws are tightened down (special tool 11 9 224 ),
radial seal is pressed inwards approx. 1 mm and thus
slackened for subsequent removal.
Insert screws (special tool 11 9 224 ) and tighten down to
approx. 20 Nm.
Insert screws (special tool 11 9 223) and screw in until they
make contact without play.
Remove screws (special tool 11 9 224 ).
Insert screw (special tool 11 9 222) carefully and slowly and
detach radial seal (1).
RA Replacing front crankshaft radial seal (N40/N 42/N45/N46)
BMW AG - TIS
26.01.2013 03:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -