3 Series E90 320i (N46) SAL
Installation:
Check adapter sleeve (1) for damage and correct installation
position.
Note:
Bore hole (2) is considerably smaller and is "not" designed to
accommodate adapter sleeve.
Installation:
Position of adapter sleeve is identified by a notch in flywheel.
Installation:
Replace screws.
Tightening torque 11 22 2AZ
.
RA Removing and installing or replacing flywheel (N40/N42/N45/N46)
BMW AG - TIS
26.01.2013 03:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -