3 Series E90 320i (N46) SAL
Check hub (2), replace if necessary.
Install hub (2).
Installation:
Replace central bolt (1).
Insert central bolt (1) and install without play.
Important!
Do not tighten down central bolt (1) yet.
Note:
Old version
While central bolt is slackened, balancing shafts can be rotated by
hand at ends.
Align balancing shafts in such a way that special tool 11 9 330
can be joined from inlet side to ends of balancing shafts.
Note:
New version
While central bolt is slackened, balancing shafts can be rotated by
hand at ends.
Align balancing shafts in such a way that special tool 11 5 140
can be pushed from inlet side underneath balancing shafts.
RA Replacing timing chain (N42/N46)
BMW AG - TIS
26.01.2013 03:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
