3 Series E90 320i (N46) SAL
Install oil line (1).
Insert nuts of bearing caps 2 and 4 and tighten without play.
Insert banjo bolt of oil line (1) and tighten down.
Note:
Grip bearing caps by hand when tightening down nuts.
Align bearing caps.
Tighten down nuts of bearing caps E1 to E4.
Note:
Magnet wheel (1) is secured with a lug groove in eccentric
shaft (2).
Important!
Install original antimagnetic screw (3) only.
Insert screw (3) and tighten down.
Tightening torque 11 37 1AZ .
RA Removing and installing / replacing eccentric shaft (N42 / N46)
BMW AG - TIS
26.01.2013 03:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
