3 Series E90 320i (N46) SAL
11 37 030
Removing and installing/replacing eccentric
shaft sensor (N42/N46)
Necessary preliminary tasks:
•
Remove cylinder head.
Important!
Screws can drop between the gearcase and the timing chain
into the timing drive (risk of damage).
Place a clean cloth between the gearcase and the timing
chain.
Remove screw of chain guide.
Release screws on eccentric shaft sensor (1).
RA Removing and installing/replacing eccentric shaft sensor (N42/N46)
BMW AG - TIS
26.01.2013 03:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
