3 Series E90 320i (N46) SAL
13 62 010
Removing and installing/replacing differential
pressure sensor (N42, N46)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit.
•
Switch off ignition
•
Remove acoustic cover
Unlock connector and remove.
Release screws.
Pull differential pressure sensor (1) out of intake air manifold.
Installation:
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing/replacing differential pressure sensor (N42, N46)
BMW AG - TIS
26.01.2013 04:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
