3 Series E90 320i (N46) SAL
Expose pressure line up to connection on power steering gear.
Release banjo bolt and disconnect pressure line.
Installation:
Replace all sealing rings.
Make sure pressure line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 9AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing pressure line for power steering (N45, N45T, N46, N46T)
BMW AG - TIS
26.01.2013 06:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -