bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Replacing Suction Line For Power Steering (N45, N45T, N46, N46T)|Page 1124 > < 8 RA Removing And Installing_replacing Fluid Reservoir For Power Steering|Page 1122
Page 1
background image

32 41 311

Replacing suction line for power steering
(N45, N45T, N46, N46T)

Warning!

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

 

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Close off pipe connections with plugs.

Recycling:

Catch and dispose of hydraulic fluid in a suitable container.

Observe country-specific waste-disposal regulations

Necessary preliminary tasks:

Draw off and dispose of hydraulic fluid from fluid reservoir

If necessary, remove intake filter housing

If necessary, remove fluid reservoir from bracket.

Release hose clamp (1) and detach suction line (2) from fluid
reservoir.

Installation:

Make sure suction line is laid without tension and with sufficient
spacing to adjoining components.

RA  Replacing suction line for power steering (N45, N45T, N46, N46T)

BMW AG - TIS

26.01.2013  06:11

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Replacing Suction Line For Power Steering (N45, N45T, N46, N46T)|Page 1124 > < 8 RA Removing And Installing_replacing Fluid Reservoir For Power Steering|Page 1122