3 Series E90 320i (N46) SAL
Detach prestamped positioning aid from backing.
-
Positioning aid "C1" rear door, left (below positioning aid "C2")
-
Positioning aid "D1" rear door, right (below positioning aid "D2")
If necessary, cut out prestamped cutout for bore from positioning aid. Align positioning aid with printed help marking
(X) and contact edge (2 and 3) to rear door and positioning aid "C2" or "D2" and press.
Seal must rest on positioning edge (1) during sticking.
X
Start of bend radius
Positioning aid "C3" for rear door, left ("D3" right)
RA Removing and installing / replacing seal on rear door, left or right
BMW AG - TIS
26.01.2013 10:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
