3 Series E90 320i (N46) SAL
54 12 211
Removing and installing complete glass
slide/tilt sunroof
Necessary preliminary tasks:
•
Remove roofliner
Important!
A second person is required to help in removing the glass
slide/tilt sunroof.
-
Unfasten plug connection (1) and disconnect.
-
Detach water drain hoses.
-
Helper must hold glass slide/tilt sunroof to prevent it falling out.
-
Release screws in marked area and carefully lower glass slide/tilt sunroof.
Tightening torque: 54 12 02AZ
.
Important!
Do not damage any surrounding parts when removing the glass slide/tilt sunroof.
-
Remove glass slide/tilt sunroof completely (through rear lid at rear).
RA Removing and installing complete glass slide/tilt sunroof
BMW AG - TIS
26.01.2013 11:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
