3 Series E90 320i (N46T) SAL
11 41 005
Removing and installing/replacing chain
tensioner for oil pump drive (N46T)
Special tools required:
•
11 3 340
Necessary preliminary tasks:
•
Remove vibration damper.
•
Remove oil sump.
•
Remove and install oil pump.
Important!
Balancing shafts must be readjusted after installation of chain
tensioner.
Open screw plug (1).
Tightening torque: 11 11 8AZ
.
Installation:
Replace seal.
RA Removing and installing/replacing chain tensioner for oil pump drive (N46T)
BMW AG - TIS
27.01.2013 04:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -