3 Series E90 320i (N46T) SAL
Installation:
Replace gasket (1).
Coat new seals with automatic transmission fluid and install.
Installation:
Replace gaskets (1).
Coat new seals with automatic transmission fluid and install.
Important!
Tighten down bolts in sequence (1 to 6).
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Tightening torque 24 30 1AZ
.
RA Replacing mechatronics (GA6L45R)
BMW AG - TIS
27.01.2013 06:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -