3 Series E90 325d (M57T2) SAL
Installation:
When exchanging bearing shells (also exchange
crankshafts), classification of bearing shell allocation in the
crankcase is discontinued.
Only fit yellow bearing shells into the crankcase.
Note:
The axial guide on the crankshaft is fitted to bearing point 6.
Insert pilot bearing shell in the engine block.
The crankshaft is marked with yellow, green or white paint,
depending on the tolerance of the main bearing spigot.
Installation:
The bearing shell classification for the bearing cover is
marked on the crankshaft in yellow, green or white paint.
RA Replacing all main crankshaft bearing shells (M57T2)
BMW AG - TIS
05.02.2013 11:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -