Removing and Installing Vibration Damper for 3 Series E90 325i (N52K) Engine
11 23 010
Removing and installing/replacing vibration
damper (N52K)
Necessary preliminary tasks:
•
Remove underbody protection.
•
Remove drive belt
Release screws (1).
Tightening torque 11 23 1AZ
.
Remove vibration damper (2).
Assemble engine.
RA Removing and installing/replacing vibration damper (N52K)
BMW AG - TIS
08.02.2013 17:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
