3 Series E90 325i (N52K) SAL
Support exhaust system with jack and special tool 31 2 220 and
secure against falling out.
Unscrew nuts.
Installation:
Replace self-locking nuts.
Replace seal.
Tightening torque 18 20 1AZ
.
Release bolt and remove bracket (1).
Installation:
Tightening torque 18 20 2AZ
.
Unfasten screw connection.
Installation:
Tightening torque 18 20 3AZ
.
RA Removing and installing/replacing complete exhaust system (N52/ N52K/ N51)
BMW AG - TIS
08.02.2013 18:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -