3 Series E90 325i (N52K) SAL
32 00 620
Adjusting rear axle
Note:
A camber change always means a toe change as well. The
camber must therefore be adjusted first.
Adjusting camber:
Replace nut (2) and tighten to 5 Nm.
Turn eccentric bolt (1) to adjust camber to setpoint value.
Tighten nut (2).
Tightening torque 33 32 9AZ
.
Adjusting toe:
Replace nut (2) and tighten to 5 Nm.
Turn eccentric bolt (1) to adjust toe to specified value.
Tighten nut (2).
Tightening torque 33 32 7AZ
.
RA Adjusting rear axle
BMW AG - TIS
08.02.2013 20:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -