3 Series E90 325i (N52K) SAL
Detach prestamped positioning aid from backing.
-
Positioning aid "A3" front door, left (below door retainer)
-
Positioning aid "B3" front door, right (below door retainer)
If necessary, cut out cutout for bore from positioning aid. Align positioning aid with printed help markings (X, Y), bores
and contact edge (2) to front door and press.
Seal must rest on positioning edge (1) during sticking.
X
Start of bend radius
Y
Opening due to folding
Important!
-
Do not grip bonding surface
-
It is not the length of pressing in time but rather the level
of pressing (approx. 10 ... 15 N/cm
2
) which is decisive
here.
-
Separation of seal after pressing destroys the adhesive
layer
Note:
After being pressed on gently, seal can be pulled off again up to 3
times. Do not dirty adhesive area.
RA Removing and installing / replacing seal on front door, left or right
BMW AG - TIS
09.02.2013 02:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -