3 Series E90 325i (N52K) SAL
51 71 038
Removing and installing/replacing front left or
right wheel arch cover (front section)
Necessary preliminary tasks:
•
If necessary, remove front wheel
Note:
Work shown on 320d by way of example, deviations in detail are
possible in other models.
Release screws (1 and 2).
Unscrew nut (3).
Remove wheel arch cover and disconnect plug connection at
trigger transmitter.
Installation:
Make sure rear wheel arch cover and air guide (4) are correctly
seated.
Replacement:
Modify covers (1 and 2).
Modify air guide (3).
Version with Tyre Pressure Control:
Modify trigger transmitter (4) .
Version with M Technic aerodynamic kit:
Release screws (1).
Remove lower section of cover (2).
RA Removing and installing/replacing front left or right wheel arch cover (front se
BMW AG - TIS
09.02.2013 02:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -