3 Series E90 325i (N52K) SAL
62 11 280
Removing and installing (replacing)
instrument cluster
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Important!
Risk of damage!
Carry out this operation carefully so as to avoid damaging the
instrument panel.
Extend steering wheel completely and lower.
Release screws (1). Tightening torque
62 13 1AZ
.
Pull instrument cluster (2) forward slightly in direction of arrow.
Disconnect associated plug connection.
If necessary, feed out/unclip associated wiring harness.
Remove instrument cluster (2).
Replacement:
Carry out vehicle programming/coding.
Check values for Condition Based Service (CBS), correct if
necessary
RA Removing and installing (replacing) instrument cluster
BMW AG - TIS
09.02.2013 05:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -