3 Series E90 325i (N52K) SAL
11 42 Oil filter element with connections
Type
Thread
Tightening specification
Measure
1AZ Oil filter cap
(1 x)
Oil filter cap to oil-filter housing.
N52K
Replace sealing ring.
25 Nm
2AZ ASA screws
(1 x M8 x 28)
(1 x M8 x 43)
(1 x M8 x 78)
Oil filter housing to cylinder head.
N52K
M8
Replace seal.
22 Nm
3AZ Tapping screws
(3 x)
Oil/water heat exchanger to oil filter
housing.
N52K
M8 x 20
Replace seal.
16 Nm
AZD Oil filter element with connections
BMW AG - TIS
09.02.2013 11:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -