3 Series E90 325i (N53) SAL
Screw special tool 11 8 330 into base of connecting rod.
Press out connecting rod and piston to cylinder head side.
Important!
Risk of damage to oil spray nozzle.
Preliminary work:
Clamp special tool 11 4 491 in a vice.
Secure piston (1) with conrod to special tool 11 4 491 .
Warning!
Protective goggles must be worn for the next work step.
Warning!
Protective goggles must be worn.
Lever out gudgeon pin circlip with special tool 11 4 492 in
direction of arrow.
RA Removing and installing or replacing all pistons (N53)
BMW AG - TIS
10.02.2013 01:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
