3 Series E90 325i (N53) SAL
Install nitrogen oxide sensor (1).
Secure nitrogen oxide sensor (1) with special tool 11 4 260 .
New part: Tightening torque: 11 78 5AZ
.
2nd tightening: Tightening torque: 11 78 6AZ
.
Assemble engine.
Check function of DME.
RA Removing and installing/replacing nitrogen oxide sensor (N53)
BMW AG - TIS
10.02.2013 02:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
