3 Series E90 325i (N53) SAL
13 53 596
Replacing high-pressure fuel sensor (N54,
N53)
Special tools required:
•
32 1 270
•
32 2 100
Warning!
Observe warning on cylinder head cover.
Disconnect battery negative terminal (risk of fire due to short-
circuiting on removal).
Electric fuel pump starts up automatically each time door is
opened!
Carry out installation work on fuel system only with coolant
temperature below 40
°
C.
Important!
Wear full face guard and protective gloves.
Fuel can emerge spontaneously at high velocity when the
high-pressure line is released!
Important!
Adhere to conditions of absolute cleanliness when working on
the high-pressure fuel system.
Introduced contaminants can cause malfunctions in the
system!
•
Do not allow any dirt particles or foreign bodies to get
into the system.
•
Remove all traces of dirt before removing pipes or
individual components.
•
Use only fluff-free cloths.
RA Replacing high-pressure fuel sensor (N54, N53)
BMW AG - TIS
10.02.2013 02:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
