3 Series E90 325xi (N52K) SAL
Installation:
Release aluminium screw on right next to cable retaining plate
with special tool 00 9 010 .
Installation:
Aluminium screws must be replaced.
Tightening torque 23 00 2AZ
.
Detach plug (1) from reversing light switch.
Release cable from retainers.
Disconnect plugs (1) and (2) from servomotor.
Release screws.
Tightening torque 26 11 9AZ
.
Remove front propeller shaft at output flange of transfer case and
tie to one side.
Installation:
Replace screws.
RA Removing and installing transmission (GS6-37BZ) AWD N51/N52/N52K/N53
BMW AG - TIS
12.02.2013 23:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
