3 Series E90 325xi (N52K) SAL
Install swivel bearing.
Draw output shaft into wheel hub.
Install front brake disk.
Install front brake calliper.
Replace collar nut, oil collar nut/wheel bearing contact surface
only and tighten down.
No oil permitted on thread of shaft journal or collar nut.
Tightening torque 31 21 2AZ
.
Secure collar nut by positive peening on flat areas of output shaft.
Install front wheel.
RA Replacing bearing for front wheel (AWD)
BMW AG - TIS
13.02.2013 00:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -