3 Series E90 325xi (N52K) SAL
32 11 100
Replacing gaiter for steering gear on left or
right (AWD)
Important!
The power steering gear must be replaced if the polished
surface of the rack is damaged (e.g. by corrosion)!
Necessary preliminary tasks:
•
If necessary, remove diesel enclosure
Clean tie rod.
Release band clamp (1).
Mark screw-in depth of tie rod (2) or count thread turns.
Unscrew bolt (3).
Twist tie rod (2) out of tie rod end (4).
Installation:
Replace microencapsulated screw.
Tightening torque 32 21 2AZ
.
Note:
Heat shield is only fitted on the right side.
If necessary, release screws (1) and remove heat shield (2).
Tightening torque 32 21 4AZ
.
RA Replacing gaiter for steering gear on left or right (AWD)
BMW AG - TIS
13.02.2013 01:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -