3 Series E90 325xi (N52K) SAL
34 32 881
Replacing front left or right brake hose (AWD)
Note:
Read and comply with General Information.
After completing work: Bleed brake system.
Press clutch pedal down to floor and secure with pedal support.
Note:
The pedal support may only be released when the brake lines are
reconnected.
This prevents brake fluid from emerging from the expansion tank
and air from entering the system when the brake lines are opened.
Detach retainer (1) from bracket on spring strut in upward
direction.
Installation:
Retainer (1) must be felt and heard to snap into place.
Ensure correct seating in guide.
Pull brake hose out of holder (1).
Important!
Grip brake hose at square head (3) to prevent connecting
piece from turning in retaining bracket.
Detach brake hose from brake line (2).
Installation:
Tightening torque 34 32 1AZ
.
Detach brake hose from brake caliper (4).
Installation:
RA Replacing front left or right brake hose (AWD)
BMW AG - TIS
13.02.2013 02:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
