3 Series E90 325xi (N52K) SAL
If necessary, move carriage towards rear slightly.
Insert connecting element (1) into guide rail.
Engage connecting element (1) in carriage (2).
Turn control lever (3).
Insert control lever (1) in opening.
Note:
Spacer (1) of control lever must be situated in guide channel.
Move connecting element towards rear.
Clip in garage.
Assemble glass slide/tilt sunroof and carry out function check.
Initialize glass slide/tilt sunroof.
RA Removing and installing/replacing connecting element pair for glass slide/tilt s
BMW AG - TIS
13.02.2013 07:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -