3 Series E90 325xi (N53) SAL
Disconnect line to evaporation strainer (1) from carbon canister.
Important!
Risk of breakage!
Carefully remove evaporation strainer from carbon canister.
Using special tool 16 1 070 , seal opening (2) for evaporation
strainer on carbon canister.
Remove fuel filler cap and connect special tool 16 1 174 to fuel
filler neck.
Clamp special tool 16 1 174 on fuel filler neck with adjusting
wheel (1).
Important!
Turn pressure regulator on special tool 16 1 171
counterclockwise up to stop.
Connect special tool 16 1 171 using compressed air line (1) to
garage compressed air system (8 ... 10 bar).
Connect pressure sensor (2) from Diagnosis and Information
System with a measuring range of 0 ... 25 bar.
Important!
Do not yet connect fast-release coupling (3) of special tool
16 1 171 .
RA Checking fuel tank and tank ventilation system for leaks
BMW AG - TIS
14.02.2013 18:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -