bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Replacing Intake Line For Power Steering (N51, N52, N53)|Page 1137 > < 8 RA Removing And Installing_replacing Fluid Reservoir For Power Steering|Page 1135
Page 1
background image

32 41 311

Replacing intake line for power steering (N51,
N52, N53)

Warning!

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

 

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Close off pipe connections with plugs.

Recycling:

Catch and dispose of hydraulic fluid in a suitable container.

Observe country-specific waste-disposal regulations

Necessary preliminary tasks:

Draw off and dispose of hydraulic fluid from fluid reservoir

Remove intake filter housing

Release hose clamp (1) and detach suction line (2) from fluid
reservoir.

Installation:

Make sure suction line is laid without tension and with sufficient
spacing to adjoining components.

RA  Replacing intake line for power steering (N51, N52, N53)

BMW AG - TIS

14.02.2013  21:35

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Replacing Intake Line For Power Steering (N51, N52, N53)|Page 1137 > < 8 RA Removing And Installing_replacing Fluid Reservoir For Power Steering|Page 1135