3 Series E90 325xi (N53) SAL
65 20 350
Removing and installing/replacing
suppression filter
Necessary preliminary tasks:
•
Remove panel for roof pillar at rear left.
Disconnect plug connections (1).
Release screw (2).
Remove suppression filter (3) from C-pillar (4).
Installation:
Fit suppression filter (1) so that screw (2) engages thread (3)
and locating pin (4) engages bore (5).
RA Removing and installing/replacing suppression filter
BMW AG - TIS
15.02.2013 07:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -