3 Series E90 328xi (N52K) SAL
22 31 001
Replacing rubber mount for transmission
mounting (AWD)
Special tools required:
•
22 1 017
•
22 1 041
•
22 1 042
•
22 1 043
•
22 1 044
•
22 1 045
•
33 4 460
Necessary preliminary tasks:
•
Remove rear underbody protection
•
Replace centre muffler (E9x N53 only)
•
Remove complete exhaust system
•
Support transmission with hydraulic lifter.
•
Remove heat shields
•
Detach front propeller shaft, tie back to side
•
Detach rear propeller shaft, tie back to side
•
Remove cross-member from transfer case
Necessary preliminary tasks:
Lower transmission with hydraulic lifter.
Mount special tools 22 1 042 / 22 1 041 on transfer case.
Pull out rubber mount with thrust plate 22 1 043 by means of
spindle 33 4 460 and nut 22 1 017 .
RA Replacing rubber mount for transmission mounting (AWD)
BMW AG - TIS
18.02.2013 00:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -