3 Series E90 328xi (N52K) SAL
24 13 301
Replacing output flange shaft seal (GA6L45R)
AWD
Special tools required:
•
24 4 320
•
24 4 330
Important!
After completion of work, check transmission fluid level.
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
•
Remove rear underbody protection
•
Remove exhaust system.
•
Remove heat shields
•
Support transmission
•
Remove transmission cross-member.
•
Remove transfer box.
Mount special tool 24 4 320 and secure with hook wrench (1).
Screw in spindle (2) until radial shaft seal is released.
RA Replacing output flange shaft seal (GA6L45R) AWD
BMW AG - TIS
18.02.2013 00:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
