3 Series E90 328xi (N52K) SAL
31 11 001
Replacing front axle carrier (AWD)
Warning!
Danger to life!
Secure engine in installation position to prevent it from falling
down.
Necessary preliminary tasks:
•
Secure engine in installation position
•
Remove front wheels
•
Remove stabilizer
•
Only on right side: Remove front ride-height sensor with
bracket from front axle carrier
•
Remove both compression struts from front axle carrier
•
Remove both control arms on both sides from front axle
carrier
•
Lower front axle carrier
Release nuts and remove screws (1) towards bottom.
Tie up power steering gear (2).
Installation:
Replace screws and nuts.
Tightening torque 32 00 1AZ
.
RA Replacing front axle carrier (AWD)
BMW AG - TIS
18.02.2013 01:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
