3 Series E90 328xi (N52K) SAL
Clean contact face (1) of brake caliper and apply a thin coating
of anti-squeak compound.
Clean brake carrier at hammerhead guides (1) and apply a thin
coating of anti-squeak compound.
Note:
After completing work:
-
When installing new brake pads at front and rear axles, brake
fluid level must be brought up to "MAX" marking.
-
Fully depress brake pedal several times so that brake pads
contact brake discs.
-
Read and comply with notes on braking in new brake discs /
brake pads.
-
When replacing pads, reset CBS display in accordance with
factory specification.
RA Removing and installing or replacing brake pads on both front disc brakes (Teves
BMW AG - TIS
18.02.2013 04:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
