3 Series E90 330d (M57T2) SAL
22 11 011
Replacing left engine mount (M57T2)
Necessary preliminary tasks:
•
Secure engine in installation position
•
Remove underbody protection
•
Remove reinforcement plate (AWD)
•
Remove reinforcement strut (E90/E91/E92 only)
•
Remove left V-strut (E93 only)
Detach vacuum hose (1) at T-piece.
Remove engine mount with vacuum hose.
Installation:
Ensure that vacuum hose can move freely.
Release screws (1) and remove engine mount.
Tightening torque 22 11 1AZ
.
Note:
Illustration shows: AWD
Installation:
Rubber section (1) of engine mount must point to middle of
vehicle.
Engine mount designations:
Right engine mount
-
Even component number
Left engine mount
-
Odd component number
RA Replacing left engine mount (M57T2)
BMW AG - TIS
18.02.2013 19:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
