3 Series E90 330d (M57T2) SAL
64 11 261
Removing and installing/replacing auxiliary
water pump
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Follow instructions for working on cooling system.
Note:
Illustrations show a vehicle with an M47T2 engine.
Unfasten plug connection (1) and disconnect.
Release hose clamps (2) and detach coolant hoses (3) from
auxiliary water pump (4).
Pull auxiliary water pump (4) in direction of arrow out of front
engine bracket (5).
Installation:
If necessary, observe direction of flow of auxiliary water pump.
Installation:
Install auxiliary water pump (1) in front engine bracket so that
rubber mounts (2) slide exactly in associated locators (3).
After installation:
Fill and vent cooling system.
RA Removing and installing/replacing auxiliary water pump
BMW AG - TIS
19.02.2013 13:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
