3 Series E90 330i (N52) SAL
11 13 000
Removing and installing, sealing or replacing
oil sump (N52)
Important!
Aluminium-magnesium materials.
No steel screws/bolts may be used due to the threat of
electrochemical corrosion.
A magnesium crankcase requires aluminium screws/bolts
exclusively.
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
Necessary preliminary tasks:
•
Remove engine splash guard.
•
Secure engine in installation position.
•
Lower front axle.
Note:
The lines must be detached from the engine oil sump in the case
of the optional extra automatic transmission; if necessary, detach
vane pump and place to one side.
RA Removing and installing, sealing or replacing oil sump (N52)
BMW AG - TIS
19.02.2013 06:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
