3 Series E90 330i (N53) SAL
11 22 500
Removing and installing or replacing flywheel
(N53)
Special tools required:
•
11 4 180
•
11 9 260
Necessary preliminary tasks:
•
Remove transmission.
•
Remove clutch.
Enlarge special tool 11 9 260 with slot.
Enlarge slot on special tool 11 9 260 to
8 mm .
Manual transmission:
Block flywheel with special tool 11 9 260 .
Release flywheel screws with special tool 11 4 180 .
Tightening torque: 11 22 2AZ
.
Installation:
Flywheel is secured with a dowel pin.
Fit new flywheel screws.
RA Removing and installing or replacing flywheel (N53)
BMW AG - TIS
19.02.2013 18:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -