3 Series E90 330i (N53) SAL
Installing camshaft bearing bank:
Pre-install special tool 11 8 551 on cylinder 2.
Observe identification markings E and A
E:
intake side.
A:
exhaust side.
Insert special tool 11 4 552 in screw connection of cylinder head
cover
Press down roller cam follower (1) on cylinder No. 2 with spindle
nut (1) of special tool 11 4 551.
Lay lower bearing strip (1) on cylinder head.
Installation:
Lubricate all bearing points with engine oil.
Insert exhaust camshaft (1) in lower bearing bank.
Installation:
Lubricate all bearing positions and cams with engine oil.
Installation position (1) of exhaust camshaft (2) at 1st cylinder.
RA Removing and installing or replacing exhaust camshaft (N53)
BMW AG - TIS
19.02.2013 18:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -