3 Series E90 330i (N53) SAL
11 51 000
Removing and installing/replacing coolant
pump (N53)
Warning!
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Recycling:
Catch and dispose of drained coolant.
Observe country-specific waste-disposal regulations.
Important!
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
If a coolant pump which has already been operated is reused,
it must be filled immediately after being removed with coolant
(mixture ratio 1:1 / water: coolant).
Necessary preliminary tasks:
•
Remove coolant thermostat.
RA Removing and installing/replacing coolant pump (N53)
BMW AG - TIS
19.02.2013 19:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
