3 Series E90 330i (N53) SAL
Release knurled screws (2) and remove special tool 21 2 180
from SAC clutch.
Withdraw special tool from clutch plate with aid of accompanying
screw (1).
Installing removed SAC clutch with new clutch plate:
Installation:
N52
Screws must be replaced.
Jointing torque and angle of rotation must be observed without
fail.
Important!
Before installing an SAC clutch which has been in service with
a new clutch plate: always reset adjustment ring in new
position.
RA Removing and installing or replacing clutch (SAC 228)
BMW AG - TIS
19.02.2013 20:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -