bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Replacing Delivery Line For Power Steering (N51, N52, N53)|Page 1087 > < 11 RA Replacing Intake Line For Power Steering (N51, N52, N53)|Page 1085
Page 1
background image

32 41 332

Replacing delivery line for power steering
(N51, N52, N53)

Warning!

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

 

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Close off pipe connections with plugs.

Recycling:

Catch and dispose of hydraulic fluid in a suitable container.

Observe country-specific waste-disposal regulations

Necessary preliminary tasks:

Draw off and dispose of hydraulic fluid from fluid reservoir

Remove front underbody protection

Remove radiator

Release banjo bolt and detach pressure line from vane pump.

Installation:

Replace all sealing rings.

Make sure pressure line is laid without tension and with sufficient
spacing to adjoining components.

Tightening torque  32 41 8AZ

.

RA  Replacing delivery line for power steering (N51, N52, N53)

BMW AG - TIS

19.02.2013  23:10

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Replacing Delivery Line For Power Steering (N51, N52, N53)|Page 1087 > < 11 RA Replacing Intake Line For Power Steering (N51, N52, N53)|Page 1085