3 Series E90 330i (N53) SAL
32 41 060
Removing and installing or replacing power
steering vane pump (N51, N52, N53)
Warning!
Danger of poisoning if oil is ingested/absorbed through the
skin!
Risk of injury if oil comes into contact with eyes and skin!
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Important!
Aluminium-magnesium materials.
No steel screws/bolts may be used due to the threat of
electrochemical corrosion.
A magnesium crankcase requires aluminium screws/bolts
exclusively.
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Observe country-specific waste-disposal regulations
RA Removing and installing or replacing power steering vane pump (N51, N52, N53)
BMW AG - TIS
19.02.2013 23:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
