3 Series E90 330i (N53) SAL
61 35 107
Removing and installing or replacing
Junction Box electronics
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove footwell side trim panel on A-pillar, right
•
Remove trim for instrument panel, bottom right
Note:
Glovebox removed for purposes of clarity.
Disconnect plug connection (1).
Release screws (2) and remove junction box electronics (3)
from holder.
Disconnect plug connection (1).
Installation:
Make sure junction box electronics is correctly seated on plug
connection (2) of holder.
RA Removing and installing or replacing Junction Box electronics
BMW AG - TIS
20.02.2013 07:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
